Ensure the mating SATA plug is aligned and fully inserted to avoid bent pins or intermittent signal loss.
Do not exceed recommended voltage, current or temperature limits; confirm final ratings against your system safety design.
When soldering wires to the terminals, follow appropriate solder temperature and dwell-time profiles to prevent housing deformation.
Avoid pulling on the cable during unmating; hold the connector body to reduce mechanical stress on solder joints.
Keep contacts free from dust, flux residue and corrosive environments to maintain long-term low contact resistance.
For high-speed server or storage applications, match this connector with controlled-impedance cable and proper PCB routing to preserve signal integrity.









